Mini Split Installation
Global Green Solutions Makes Your Home Comfortable
Mini Split Installation in Los Angeles
A ductless mini split installation in Los Angeles puts one or more indoor heads on a refrigerant line to an outdoor heat pump, cooling and heating rooms without ductwork. Global Green Solutions sizes and installs single and multi-zone systems, with the permit the job requires and a free estimate before you decide.
Get a Free Quote Now!
Mini splits suit homes without ducts, additions and converted garages, and rooms the central system never keeps comfortable. Our licensed technicians handle the whole job, from choosing the indoor units to the final test.
Ductless Installations We Have Done



How Does a Mini Split Work?
A heat-pump mini split is a heat pump split into two parts. The outdoor unit holds the compressor; each indoor head holds a coil and a fan and mounts on a wall, in the ceiling or near the floor. A small bundle of refrigerant lines, a power cable and a condensate drain runs between them through a small opening in the wall, so there is no ductwork to build. Because it is a heat pump, the same system cools in summer and heats in winter, and for climates with moderate heating and cooling needs the DOE describes heat pumps as an energy-efficient alternative to separate furnaces and air conditioners (DOE Energy Saver).
When Is a Ductless Mini Split the Right Choice?
No ducts in the house
Older homes heated by wall or floor furnaces can add cooling and efficient heat without opening walls for ductwork.
Additions, ADUs and garage conversions
A new room gets its own system instead of overloading the main one.
Rooms that never feel right
A bonus room over the garage or a sunny office gets its own head and its own temperature.
Room-by-room control
Each indoor head has its own setting, so unused rooms are not conditioned.
Comparing it with ducted systems? Read mini split vs central air, or see AC installation for central systems.
Single-Zone or Multi-Zone?
Single-zone
One outdoor unit and one indoor head: the simplest way to condition one room or an open area.
Multi-zone
One outdoor unit serving several indoor heads, each with its own control: fewer units outside, more rooms covered.
Several single-zone systems
Separate outdoor units for different parts of the house, so one unit failing does not take down the whole house.
Indoor Unit Styles
Wall-mounted
The most common head, mounted high on a wall.
Ceiling cassette
Sits flush in the ceiling and spreads air in several directions.
Floor console
Low on the wall, useful under windows or in attic rooms with sloped ceilings.
Slim ducted
Hidden above a ceiling with short ducts to one or a few rooms.
What Affects the Cost of Mini Split Installation?
Number of indoor heads
Each head adds equipment, line set and labor.
Capacity and efficiency
Sized from the rooms' load and rated in SEER2 for cooling and HSPF2 for heating (HSPF explained).
Line set routing
Longer or hidden runs through attics and walls take more time than a short run through one exterior wall.
Electrical work
The outdoor unit needs its own circuit, and some panels need more capacity.
Mounting and drainage
Brackets or a pad outside, and a condensate path for every head.
Permit
In the City of Los Angeles, installing heating and cooling equipment needs a mechanical HVAC permit from LADBS (LADBS); other cities issue their own.
For more on pricing, read our guide to mini split installation cost, and see HVAC financing for payment plans.
How Is a Mini Split Sized?
Each indoor head is sized for the room it serves, and the outdoor unit for the total, from a load calculation that weighs insulation, windows, sun and air leakage (ACCA Manual J). An oversized head cycles on and off and leaves humidity behind; an undersized one runs without catching up.
When Is a Mini Split Not the Best Fit?
If the house already has sound, well-sized ductwork, a central air conditioner or a ducted heat pump usually serves every room with one indoor unit; see AC installation. And a home that needs many rooms conditioned can end up with more indoor heads than a ducted system has registers, so price both.
What Does a Typical Mini Split Installation Involve?
1. Load and layout
The rooms are measured and each head is placed where its air reaches the space.
2. Outdoor unit
Set on a pad or wall brackets with clearance for airflow and service.
3. Indoor heads
Mounted on their brackets, with the line set and drain routed through the wall.
4. Line set and vacuum
The refrigerant lines are connected, pressure-tested and evacuated before the refrigerant is released.
5. Power and controls
The dedicated circuit is connected and each head's remote or thermostat is set up.
6. Start-up
Each zone is run in cooling and heating and checked at the head.
Once it runs, a yearly tune-up keeps the coils and filters clean, and if an existing system acts up, see heat pump repair.
Mini Split Questions
Do I need a permit for a mini split?
In the City of Los Angeles, yes: LADBS requires a mechanical HVAC permit for installing heating and cooling equipment. Other cities, such as Burbank, Glendale and Pasadena, permit through their own building departments.
Can a heat-pump mini split replace my furnace?
In many rooms it can, since a heat-pump mini split heats as well as cools; for a whole-home change, compare it with a ducted system on our heat pump installation page.
Do you install ductless AC across Los Angeles?
Yes, from Woodland Hills across the San Fernando Valley and Los Angeles; see our service area.
What Customers Say About Our Installations
Rated 4.9 on Google and 5.0 on Angi. A selection of reviews:
Central AC installation
★★★★★
“I hired Global Green Solutions for Central A/C Installation, and they did an amazing job. The team was professional, on time, and ensured everything was working perfectly.”
William J., review on Angi
AC replacement
★★★★★
“They were responsive, timely, competitively priced and did an excellent job of replacing and installing our air conditioner. This job was tough because they had to use a crane to put the unit on our roof. The team was thoughtful and professional - highly recommend. Matthew (the tech) was outstanding and customer friendly.”
Susan P., review on Google
Replacement estimate
★★★★★
“Lin came out the next day and was super professional and friendly, giving me a free HVAC replacement estimate and explaining the reasoning behind his tonnage and brand recommendation. Sent over a quote soon after he left, still haven't made a decision but wanted to leave a good review for his professionalism so far!”
Albert W., review on Google
Special Offers
We offer 24/7 maintenance and emergency HVAC repair services
Global Green Solution not only offers air conditioning installation and replacement in Los Angeles, CA. We also provide:
-
AC Installation
Let our experienced technicians install your new AC. -
AC Repair
Let our experienced technicians diagnose and repair your AC fast. -
AC Maintenance
Regular AC maintenance keeps your system running efficiently -
Radiant Barriers
Installing a radiant barrier can reduce energy consumption. -
Heating Installation
We ensure you receive the best value for heating installation. -
Heating Repair
Our team can repair your heating system & ensure efficiency. -
Duct Replacement
Duct replacement helps maintain your ventilation system. -
Furnace Repair
You should always be attentive and perform regular maintenance of your furnace system, as it is always easier to prevent an issue than resolve it. -
Furnace Installation
Global Green Solutions will install a furnace system in your home professionally. We will estimate the price of furnace replacement and suggest you the best solution in your situation. -
Heat Pump Repair
Global Green Solutions & Remodeling offers complete HVAC diagnostics as well as heat pump repair for Los Angeles. -
Heat Pump Installation
Our team of qualified professionals provides fast heat pump installation in Los Angeles.